EPS夹芯板以彩钢板为表层，阻燃聚苯乙烯泡沫板为芯材，聚氨酯为涂层剂。 面板由连续加热和压缩形成，同步缩放和切割。 在聚苯乙烯泡沫板和涂料的结合下，EPS面板能够承受重载，因此其抗压强度约为100kPa。
EPS三明治板规格
EPS夹心板：
钢板厚度：0.3mm〜0.7mm;
三明治厚度：50mm〜250mm;
可用宽度：950mm，1150mm;
可用长度：通过定制。
EPS三明治板物理和力学性能
|
项目 |
单位 |
性能指标 | ||
|
Ⅰ |
Ⅱ |
Ⅲ | ||
|
表观密度≤ |
kg/m2 |
15.0 |
20.0 |
30.0 |
|
?? 压缩强度（10％变形下的压缩应力） ≥ |
kPa |
60 |
100 |
150 |
|
导热系数≤ |
w/(m.k) |
0.041 |
0.041 |
0.041 |
|
水蒸气渗透系数≤ |
ng/Pa.m.s |
9.5 |
4.5 |
4.5 |
|
吸水能力≤ |
% |
6 |
4 |
2 |
|
氧指数≥ |
% |
30 |
30 |
30 |
注：Ⅰ级不承重。 Ⅱ类承受负荷。 Ⅲ类负荷重。
|
密度(kg/m3) |
导热系数W /（m.k） [平均温度（70±5）℃] |
有机物含量（％） | 非易燃 | 最高温度 |
| |||
|
密度 |
限制偏差 |
| ||||||
|
优势 |
一级 | 合格 |
| |||||
|
80 |
±10 |
±15 |
±20 |
≤0.044 |
≤4.0 |
A Grade |
400 |
|
|
100 120 |
<0.046 |
600 |
||||||
|
150 160 |
≤0.048 |
|||||||
|
项目 |
单位 |
性能指标 | |||||
|
Ⅰ |
Ⅱ | ||||||
|
A |
B |
A |
B | ||||
|
密度 ≥ |
kg/m2 |
30 |
30 |
30 |
30 | ||
|
?压缩强度（10％变形下的压缩应力） ≥ |
kPa |
100 |
100 |
100 |
150 | ||
|
导热系数≤ |
w/(m.k) |
0.022 |
0.027 |
0.022 |
0.027 | ||
|
水蒸气渗透系数（23 + 2）℃/ 0％至85％RH≤ |
ng/Pa.m.s |
6.5 |
6.5 | ||||
|
吸水能力≤ |
% |
4 |
3 | ||||
|
易燃 |
Ⅰ级 |
垂直燃烧 |
平均燃烧时间（S） |
30 |
30 | ||
|
平均燃烧强度（毫米） |
250 |
250 | |||||
| Ⅱ级 |
水平燃烧 |
平均燃烧时间（S） |
90 |
90 | |||
|
平均燃烧强度（毫米） |
50 |
50 | |||||
Characteristics:
1)The technology is advanced: Adopt the automatic and continuous equipment, all the main processes are controlled by computer, the quality can reach the industry standard in China. The fireproofing Grade: B3.
2) The weight is light: The weight of per square meter sandwich panel is 10~12 kg. The performance in heat reserve and heat insulate is excellent: thermal conductivity λ=0.032 KW/m.h.℃.
3) Good rigidity: Because the core materials are shaped, then heat and press them, stick to the upper and the lower surface steel sheet. When the panels are shaped, it has good integrative performance; and also there are wave shapes on the surface of the roof panel, they are stronger than the other same kind materials. The sandwich panel is fixed by the connection and the purlin, then the whole integrative rigidity will be enhanced higher, the whole roof and the wall panels will be enhanced to work well.
4)The way of fixation should be tight well and reasonable, the roof panels adopt the M6 self-trapping screw to fix to the purlin, the self-trapping screw will be set on the wave position of the roof panel in order to avoid leaking. And the self-trapping screw adopts the special constitution, for example the screw adds the whorl constitution and the screw cap add the plastic to protect, in order to reduce the possibility of leaking.
5) The way of fixation shall be reasonable; the panel will buckle each other, and then avoid the leaking from the roof panel and save the fittings.
??6) Protect from scratching: We could use the polythene film on the sandwich panel when they are processed, in order to prevent the surface of the steel from scratching when install and transport.
